View MP55C-5-28_1282448.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PENTIUM PROCESSOR P55C VOLTAGE REGULATOR MODULE
October 27, 1997
(R)
MP55C
TEL:805-498-2111 FAX:805-498-3804 WEB:http://www.semtech.com
DESCRIPTION:
The MP54C/MP55C series of power modules are low noise (no EMI), economical linear DC:DC converters with an integral connector conforming to Intel Corporation's Voltage Regulator Module specification for the Pentium(R) Processor. Outstanding features include internal current limiting and thermal shutdown, providing full device protection against load faults and thermal overstress. The MP55C is designed to power split voltage plane microprocessors requiring 3.3V VI/O and 2.xV VCORE. The VI/O is always supplied directly from a 3.3V input; either the main system power supply or a low dropout regulator on the motherboard. The CPU core can be supplied either from the 3.3V main supply to reduce heat dissipation (MP55C-3.3) or the 5V main power supply (MP55C-5). The MP55C-3.3 still requires a few mA of 5V power for control circuitry. The MP55C-3.3 will not be available for CPU core voltages higher than 2.8V. Please contact Semtech for availability.
FEATURES: * Integral VRM header connector * Input voltage 5V 5% * 2.8 0.1V output for CPU core power * 3.3V passes through the I/O power plane * Maximum output current 6A * Input power voltage: *
5V 5% for MP55C-5 or 3.3V for MP55C-3.3 Low noise, no EMI
ORDERING INFORMATION:
DEVICE MP55C-5-2.8 MP55C-5-2.5 MP55C-3.3-2.8 MP55C-3.3-2.7 MP55C-3.3-2.5 Input (V) 5.0 5.0 3.3 3.3 3.3 Output (V) 2.8 2.5 2.8 2.7 2.5
APPLICATIONS: * Pentium(R) Processor P55C, Cyrix 6x86 and
AMD5K86 power supplies
ELECTRICAL CHARACTERISTICS
PARAMETER Output Voltage (1) 2.8V version 2.7V version 2.5V version SYMBOL VO MIN 2.7 2.6 2.4 TYP 2.8 2.7 2.5 0.015 0.1 1.2 0.40 7.5 12 0.005 0.5 0.003 72 0.5 100 MAX 3.0 2.8 2.6 6.0 0.2 0.4 1.3 UNITS V
Output Current Line Regulation(1) Load Regulation(1) Dropout voltage Current Surge Limit Quiescent Current Temperature Coefficient Temperature Stability RMS Output Noise(2) Ripple Rejection Ratio Linear Airflow Requirements (ambient temperature 55C)
(MP55C-5) (MP55C-3.3)
IO REG(LINE) REG(LOAD) VD IS IQ TC TS VN RA
A % % V A mA %/C % %VO dB m/s ft/min
16
NOTES: (1) Low duty cycle pulse testing with Kelvin connections required. (2) Bandwidth of 10 Hz to 10 kHz.
Pentium is a registered trademark of Intel Corporation. AMD5K86 is a trademark of Advanced Micro Devices. 6x86 is a trademark of Cyrix.
(c) 1997 SEMTECH CORP.
652 MITCHELL ROAD NEWBURY PARK CA 91320
PENTIUM PROCESSOR P55C VOLTAGE REGULATOR MODULE
October 27, 1997 INPUT AND OUTPUT CONNECTIONS Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Row A VSS VSS ND VI/O +3.3V +3.3V VCORE VCORE VSS VCORE PWR GOOD SENSE VSS +5.0V +5.0V Row B VSS VSS VI/O VI/O +3.3V +3.3V VCORE VCORE VCORE VCORE RES DISABLE VSS +5.0V +5.0V Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 End view of VRM connector (viewed from motherboard side) 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 VRM PCB A B
(R)
MP55C
VOLTAGE REGULATOR MODULE CONNECTOR PIN REFERENCE
Pin Name +3.3V +5.0V VCORE VI/O VSS DISABLE I/O Input Input Output Output Input Input Function +3.3V Supply +5.0V Supply Voltage Regulator Module Output CPU I/O power connection. Ground Reference When driven high, this input will disable the Voltage Regulator Module output and the output of the module will float. Power Good is driven low when the VRM output is not within valid levels. Sense is provided for the regulator to correct for voltage drops across the connector and motherboard powerplane. Formerly UPVRM# Notes Connected directly to VI/O. MP55C-3.3: Main Power Input MP55C-5: Main power input MP55C-3.3: Bias for regulator control 2.8V output for CPU core Tied to 3.3V input (VCC3) Ground Not connected
PWR GOOD SENSE
Output Input
Not connected MP55C-5: Not connected MP55C-3.3: Connected Tied to output. Not connected
RES ND
Input
(c) 1997 SEMTECH CORP.
652 MITCHELL ROAD NEWBURY PARK CA 91320
PENTIUM PROCESSOR P55C VOLTAGE REGULATOR MODULE
October 27, 1997
(R)
MP55C
MECHANICAL DIMENSIONS
Dimension A B C D E B2 B3 B5
Inches 2.575 1.8 0.8 1.6 0.24 0.42 0.15 0.5
Millimeters 65.4 45.7 20.3 40.6 6.1 10.7 3.8 12.7
Component size and location for illustration only
INPUT VOLTAGE CONFIGURATIONS
MP55C-3.3 Uses 3.3V input (from main system power supply) for conversion to CPU core voltage. Lowest dropout at 4A is 0.35V; VCORE higher than 2.8V must use MP55C-5. A few milliamps of power at 5V is necessary for control circuit bias.
MP55C-5 Uses 5V for main power and 3.3V for VI/O. 3.3V can be supplied by a low dropout regulator such as an EZ1085. 5V is supplied by main system power supply.
(c) 1997 SEMTECH CORP.
652 MITCHELL ROAD NEWBURY PARK CA 91320

▲Up To Search▲

Price & Availability of MP55C-5-28

	To Download MP55C-5-28 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .